Summary

This is a model of a Ford GT 40 (Le Mans) in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhausts ;-)
After printing, the model can be assembled with the help of integrated connectors.
The wheels can be turned, but the car will not roll.

Versions

The complete set is available in a 3MF file for a one-color print.
There is a 3MF-file with predefined colors intended for users of a multicolor printer.
Otherwise, the body, rims and the tires must be printed separately.

Print

Print with 0.15 layer hight or lower to bring up the details.
No supports are needed.
Use 3 perimeters and 10% infill.

Post processing

The small struts can be removed really quickly and cleanly using a side cutter.
Please remove the predesigned supports under the front axle and under the rear fenders.

Assembly

The kit is easy to assemble. All parts fit together very well.
Use some grease for the hole in the rim so that the wheel turns more easily.
If a part should be loose, superglue can be used.

Dimensions at 100% scale (1:24)

The fully assembled model has the following dimensions
Height: 42.3mm
Depth: 167.8mm
Width: 74.7mm

The complete kit card has the following dimensions when printed
Height: 32.8mm
Depth: 174mm
Width: 123.5mm
Scaling will work in a low range due to the tolerances.

You ❤ Kit Car(d)s?

Have a look into my collections ;-)

Do you like my work?

Each model is a handcrafted composition for fast, easy and stunning multicolor printing. Please download and have a lot of fun! I would like to ask for a like and follow :-)

You want to make money with my work?

Have a look here: Patreon (work in progress)