If you want to sell prints of this model, as well as all of my models - future and past
Subscribe to

My Patreon

Road Trippin 🌿🚗✨

A winding ribbon of road cuts through deep green forests, leading the eye on a slow, easy cruise from page to page. Layers of foliage stack like soft waves, while a tiny pop of red on the route hints at a carefree ride, windows down, playlist up. It’s a pocket-sized daydream for anyone who loves the feeling of getting lost on purpose and finding calm along the way. 🌲🎶

Why it vibes:

Forest canopy textures that feel lush and alive 🌳
Smooth, flowing road that guides the gaze and the mood 🛣️
Bold red tassel for a punch of color and a road-trip spirit ❤️
Lightweight and durable, perfect for everyday reads 📚

Great for:

Nature lovers and highway daydreamers 🌄
Gifting to friends who are always planning the next adventure 🎁
Adding a splash of color to a favorite book or travel journal 🗺️

Cue the chorus and turn the page. Road Trippin is made for slow miles, good company, and stories that wander in all the best ways. 🌤️

Maker notes:

While the included profiles are carefully optimized for a 0.4 mm nozzle to retain detail across different settings, this model is still best printed with a 0.2 mm nozzle for the sharpest ribs, phalanges, and frame curls 🧩🖨️
Make sure to clean the build plate with dishwashing soap and warm water before printing. Handwashing soaps should never be used to clean build plates because moisturizers can harm adhesion 🧼💧

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used in the photos:

PLA Jayo Black Transmission Distance: 0.3 / Amazon

PLA Basic Green Transmission Distance: 2

PLA EryOne Apple Green Transmission Distance: 5 / Amazon

PLA Jayo Matte White Transmission Distance: 3.8 / Amazon

PLA eSun Fire Engine Red Transmission Distance: 2.9

(There is a pause at the end of the White color. You have to unload the White and load Red on the same slot. Then resume printing normally)

Color Palette:

Swap Instructions:

Start with Black
At layer #7 (0.65mm) swap to Green
At layer #11 (0.97mm) swap to Apple Green
At layer #15 (1.29mm) swap to Matte White
At layer #18 (1.53mm) swap to Fire Engine Red for the rest.(There is a pause at the end of the White color. You have to unload the White and load Red on the same slot. Then resume printing normally)