Summary
This is a model of a Dodge Charger R/T (1969) in a kit card style. Some characteristic details can be discovered.
After printing, the model can be assembled with the help of integrated connectors.
The wheels can be turned, but the car will not roll.

Versions
The complete set is available in a STL file for a one-color print.
There is a 3MF-file with predefined colors intended for users of a multicolor printer.
Otherwise, the body, rims and the tires must be printed separately.

Print
Print with 0.15 layer hight or lower to bring up the details.
No supports are needed.
Use 3 perimeters and 10% infill.

Post processing
The small struts can be removed really quickly and cleanly using a side cutter.

Assembly
The kit is easy to assemble. All parts fit together very well.
Use some grease for the hole in the rim so that the wheel turns more easily.
If a part should be loose, superglue can be used.

Dimensions
The fully assembled model has the following dimensions
Height: 40.4mm
Depth: 160mm
Width: 60mm (including side mirrors)

The complete kit card has the following dimensions when printed
Height: 32.7mm
Depth: 163.9mm
Width: 87mm
Scaling will work in a low range due to the tolerances.

Other models
I will also try to publish other car models. Stay tuned!

I hope you had as much fun printing and assembling it as I did :-)

Do you like my work?
Each model is a handcrafted composition for fast, easy and stunning multicolor printing. Please download and have a lot of fun! I would like to ask for a like, share and follow :-)

You want to make money with my work?

Have a look here: Patreon (work in progress).