If you want to sell prints of this model, as well as all of my models - future and past
Subscribe to

My Patreon

Tanjiro stands tall, framed by flames 🔥 and determination 💪 in this bold design. His iconic look and fierce energy are captured mid-motion, giving off that “don’t mess with me” vibe 😤. Whether you’re deep into a manga binge 📖 or flipping through a fantasy novel ✨, this bookmark is here to remind you of strength, loyalty, and the will to keep going, just like our favorite demon slayer 🗡️.

I really wanted to pull off the semi-transparency in this one, and it took a lot of timeediting the design literally pixel by pixel 🧵 to make it work just right. But wow, it was so worth it 😍. I absolutely love how it turned out, and I hope you will too ❤️.

Maker notes:

While the included profiles are carefully optimized for a 0.4 mm nozzle to retain detail across different settings, this model is still best printed with a 0.2 mm nozzle for the sharpest ribs, phalanges, and frame curls 🧩🖨️
Make sure to clean the build plate with dishwashing soap and warm water before printing. Handwashing soaps should never be used to clean build plates because moisturizers can harm adhesion 🧼💧

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used in the photos:

PLA Jayo Black Transmission Distance: 0.3 / Amazon

PLA KINGROON Skin Transmission Distance: 5.3 / Amazon
PLA Jayo Matte White Transmission Distance: 4.2 / Amazon
PLA EryOne Rose Red Transmission Distance: 2.2 / Amazon

Color Palete:

Swap Instructions:
Start with Black
At layer #10 (0.89mm) swap to Skin
At layer #16 (1.37mm) swap to Matte White
At layer #18 (1.53mm) swap to Rose Red for the rest.