If you want to sell prints of this model, as well as all of my models - future and past
Subscribe to My Patreon:

This bookmark blends elegance and mystery with a blade that blooms beneath the stars 🌙✨. Surrounded by soft florals and glowing in deep purples and blues, Nightpetal [Framed] feels like something pulled from a dream or a moonlit fairytale. Whether you're diving into epic battles or quiet romances, this design adds a magical edge to your reading journey 💜🌸🗡️.

Maker notes:

While the included profiles are carefully optimized for a 0.4 mm nozzle to retain detail across different settings, this model is still best printed with a 0.2 mm nozzle for the sharpest ribs, phalanges, and frame curls 🧩🖨️
Make sure to clean the build plate with dishwashing soap and warm water before printing. Handwashing soaps should never be used to clean build plates because moisturizers can harm adhesion 🧼💧

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used in the photos:

PLA Jayo Black Transmission Distance: 0.3 / Amazon

PLA KINGROON Blue Transmission Distance: 2.6 / Amazon

PLA Jayo Pink HS Transmission Distance: 4.8 / Amazon

PLA+ Jayo 2.0 White Transmission Distance: 7.5 / Amazon

Color Palete:

Swap Instructions:
Start with Black
At layer #8 (0.73mm) swap to Blue
At layer #12 (1.05mm) swap to Pink HS
At layer #16 (1.37mm) swap to White for the rest.