If you want to sell prints of this model, as well as all of my models - future and past
Subscribe to

My Patreon

The "Stargazer" bookmarks feature a charming black cat gazing at the night sky, surrounded by whimsical flowers and a crescent moon. Perfect for dreamers and book lovers alike!

Maker notes:

While the included profiles are carefully optimized for a 0.4 mm nozzle to retain detail across different settings, this model is still best printed with a 0.2 mm nozzle for the sharpest ribs, phalanges, and frame curls 🧩🖨️
Make sure to clean the build plate with dishwashing soap and warm water before printing. Handwashing soaps should never be used to clean build plates because moisturizers can harm adhesion 🧼💧

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used in the photos:

PLA KINGROON Black Transmission Distance: 0.4
PLA KINGROON Blue Transmission Distance: 4
PLA KINGROON Sky Blue Transmission Distance: 2.6
PLA Geetech Silk Gold Transmission Distance: 0.7
PLA 3D Jake Eco White Transmission Distance: 2.5 (There is a pause at the end of the 4th color. You need to unload the gold and load white in the same slot, then resume printing)

Color Pallet:

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #12 (1.04mm) swap to Sky Blue
At layer #16 (1.36mm) swap to Silk Gold
At layer #19 (1.6mm) swap to White for the rest. (There is a pause at the end of the 4th color. You need to unload the gold and load white in the same slot, then resume printing)