If you want to sell prints of this model, as well as all of my models - future and past
Subscribe to

My Patreon

'Frogget Me Not' 🐸🌼 brings a little pondside charm to your reading sessions! This bookmark features an adorable frog perched among delicate daisies, giving off the perfect mix of whimsy and nature. 🌿✨ The lush green background and bright white petals make it pop, while the matching tassel adds an extra fun touch. 💚 Whether you're a frog lover, a flower fan, or just want a bookmark that makes you smile, this one's for you! 📖💖

Maker notes:

While the included profiles are carefully optimized for a 0.4 mm nozzle to retain detail across different settings, this model is still best printed with a 0.2 mm nozzle for the sharpest ribs, phalanges, and frame curls 🧩🖨️
Make sure to clean the build plate with dishwashing soap and warm water before printing. Handwashing soaps should never be used to clean build plates because moisturizers can harm adhesion 🧼💧

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used in the photos:

PLA KINGROON Black Transmission Distance: 0.4

PLA EryOne Matte BLACK FOREST GREEN Transmission Distance: 1.5

PLA EryOne Apple Green Transmission Distance: 5

PLA EryOne Mango Yellow Transmission Distance: 4.8

PLA Jayo Matte White Transmission Distance: 4.6

(There is a pause at the end of the Yellow color. You have to unload the Yellow and load White on the same slot. Then resume printing normally)

Color Palette:

Swap Instructions:

Start with Black
At layer #8 (0.72mm) swap to Army Green
At layer #9 (0.8mm) swap to Apple Green
At layer #12 (1.04mm) swap to Yellow
At layer #15 (1.28mm) swap to Matte White for the rest.(There is a pause at the end of the Yellow color. You have to unload the Yellow and load White on the same slot. Then resume printing normally)