Railroad Island - Mini Train Diorama

In Railroad Island, the concept of inside and outside is slightly reversed than in other Mini train models. On the island, the small train runs beside palm trees and through a cave, while on the outside, ships travel along the coast.

As with all the other dioramas, you can turn the hand-wheel to set the ships and the train in motion, or place the diorama into the motorized boxes to maximize the fun.

You can also replace the sailboat with the Mini Benchy from a previous diorama.

Have a look at more Mini Train models and leave a follow👍

Printing:

Following PLA Basic Filaments are used

Silver/Grey

Cocoa Brown

Black

White

Cyan

Green

Red (Lighthouse)

Other colors are possible of course, look what you have in stock.

I printed as always with a 0,4mm nozzle! Iam very pleased with the result, but you can try a 0,2 nozzle as well.

Assembly:

You need 6pcs round 4x2 magnets for the train with the wagons

and 2pcs round 4x2 magnets more for each ship (up to 2). In total 10x magnets

Insert 3pcs Magnets in the train, wagons and ships with same polarity direction
Insert 3 magnets into the inner track and hold them with the train and wagon from the other side
Insert 2 magnets to the outer track and hold them with the ships
Adjust all magnets so the hand-wheel can catch all magnets

Press the hand-wheel in place . Check again if all magnets are captured correctly

Remove the train and put the terrain on top
Use the trees &, houses and a bit of glue to combine base with terrain
Put the train back on track and have fun.

I hope you like this little project.🚂

If you want to support me, you can simply follow me & like the model.

You want to sell printed parts from my designs? Commercial license you get at my Patreon:

Folow my Linktree: https://linktr.ee/bambamdesign